Hello guys ! The substitute of the chipset, re-steaming the chip requires specialised chipset closing machines for tens of tens of millions of dong. If there are not any circumstances, we are able to use infrared lights or KADA 853A chipset welding machine also can do it. Please information those that would not have the circumstances to exchange the chipset with a KADA 853A welder.
You want to put together the next instruments:
KADA 853A chipset welding machine: Present worth is about 2 million 5.
Torch head rack, used to hold the torch above: Value is about 600k.
Chip torch, used to connect to the torch, has varieties reminiscent of VGA chip measurement 28 x 28 mm, male chip 36 x 36 mm, North chip 41 x 41 mm. Value 200 / 1 piece.
With a price of about 3 million 7 you possibly can change the male chip, north chip and VGA chip.
Introduction of KADA 853A chipset welder:
Heating range energy: 600w.
Heating temperature: 98ºC to 380°C.
Torch energy: 500w.
Torch temperature: 100 ° C to 450 º C.
Impedance: <= 2 ohms.
Energy provide to warmth the torch: 12v.
Air stream: 100L/min.
The machine consists of a decrease heating plate and a hard-to-heat high mixed with a torch mount to have a easy chipset welding machine.
See additionally: Change male chip with infrared gentle
KADA 853A . Welding Machine Consumer Handbook
- The temperature and wind management knob of the highest torch. Once we press the knob is to regulate the wind, after we press it to launch it’s to regulate the temperature.
The change is used to activate and off the highest torch.
The underside heating range temperature knob, the very best is about 380 ° C
The change button, after we press it to look on the clock to see how a lot the temperature is rising. Once we launch this button to see how a lot it’s adjusting its temperature.
The change to activate and off the warmth range is beneath.
The clock exhibits the temperature of the range and the torch. When the temperature is reached, the inexperienced gentle will gentle up.The way to change chipset with KADA 853A hàn welding machine+ Open the facility change of the torch and the underside range to regulate the temperature.
+ You proceed to regulate the range beneath to the very best temperature ( 380 ° C). The highest torch is ready to max wind and the torch temperature is 350°C.
+ Take away the CMOS battery, chipset heatsink, open the CPU cowl on the motherboard for PC
+ Put chipset solder grease on the chip stomach, then connect the mainboard to the rack, grasp the torch on the bracket, about 2 cm from the chip face. A small piece of copper ought to be positioned above the glass of the chip face.
+ Notice that at the moment, the highest torch change has not been turned on, simply open the kitchen change beneath to let the temperature rise slowly (you possibly can click on the atual temperature button to see how a lot the temperature is up).
+ Once we see the smoke from the chipset rising (as a result of soldering grease) we begin to activate the change on the high of the torch (the image above is lacking the VGA chip torch). And wait a second, use tweezers to softly push within the nook of the chipset in the event you see the chip shifting. For those who change the chip, take away the chip and also you’re executed.
+ After taking out the chip or steaming the chip, you set the torch all the way down to let it cool, and alter the decrease range temperature to the bottom stage, not flip it off. Doing so permits the wind to chill the torch and the range, turning off shortly. When the temperature is at its lowest, the change will be turned off.
+ Equally change the brand new chip, we additionally activate the range first, the torch after. Making VGA chip pins is similar as making male chip pins that I discussed.
That is learn how to change the male chip with an inexpensive soldering machine, this machine has the benefit of slowly rising the temperature to keep away from inflicting the chip to die attributable to thermal shock, not bending the mainboard like different do-it-yourself machines. Works properly on laptops, VGA chips, new male chips. However I discover it takes a bit longer to work on the mainboard, as a result of the temperature is sluggish, and the male chip is large, so the wait is a bit lengthy. I want you success, and in the event you discover the article good, please share it with everybody.
