Error machine USB device over current status detected

Hello guys !

Maybe you’ve additionally encountered a case when booting the mainboard to the dos display screen. Error message USB machine over present standing detected! System will shut down after  15 seconds. This message is like detecting an issue with the USB machine and the machine will shut down after 15 seconds.

That is an unique illness discovered solely on ASUS motherboards. And we can also’t enter the bios or use the keyboard and simply click on the ability for the primary to run, the machine will notify after which will flip off. This illness has 3 causes, and I’ve efficiently corrected it virtually 100%.

+ The primary trigger: This trigger many of the illness is brought on by some motive that misplaced the jumper (bridge 2 pins collectively, like a fuse), possibly since you eliminated it and forgot to connect it. enter, or maintain the primary to drop the bounce. Simply connect the jumper and that is it. On the mainboard, there may be often a 3-pin jack to attach the bounce, often connecting pins 1 and a couple of collectively, I exploit a 5v energy supply (ie, begin the machine up to make use of the USB port). Connecting pins 2 to three, utilizing 5STB energy (standby energy) signifies that when plugged in and never began, the USB port already has 5V energy, individuals do it for the aim of charging telephones, charging for iphone, ipad …You’ll be able to connect any foot, relying on the aim of use.

On the ASUS mainboard, there are often 2 locations to connect this bounce, which is close to the male chip, and behind the USB port. You see the image beneath is the bounce on the primary G41 P5QPL -AM.

+ The second trigger: As a result of the machine has a bios error, it additionally reviews the error usb machine over present standing detected! . You take away the CMOS battery for about 15 seconds after which reattach it, or take away the clear cmos jumper and fix it to a different location after which reattach it to the outdated place, when you do not reattach it, the ability won’t work. For instance, bounce clear cmos is connecting pins 1,2. You take away and fix to place 2,3 then reattach to place 1, 2 as authentic. The aim of clearing cmos is to return the bios to its authentic state. If not, take away the bios and put it within the charger to recharge the bios.

+ The third trigger: This trigger is extra widespread than the 2nd trigger, however I nonetheless should rank the 2nd trigger first as a result of I have to do it from straightforward to tough to keep away from the case of pan start. That is brought on by an open chip male or a defective male chip. In case you encounter this trigger, it’s essential use a chipset steamer or infrared gentle like me to re-steam. If steaming doesn’t work, you need to exchange the male chip. See extra articles: essential doesn’t settle for USB for reference on learn how to steam chip and remake male chip.

These are the three widespread causes for seeing the usb machine over error on the DOS display screen. Good luck along with your restore. If any of you guys have any concepts, please share them with me.