Replace vga – ps2 – usb port for mainboard

Hello guys

On the mainboard, it’s common to come across errors of VGA connector, USB port, PS2 mouse key port. The trigger is because of long-term use, unfastened, rusted or as a result of the consumer pulls too exhausting, inflicting the foot to fall off. This case seems to be simple to alter on the floor, however it’s really sophisticated.

I’ve instructed many individuals however nearly cannot do it as a result of eradicating these ports is simply too troublesome. Now I write a put up to interchange the vga – ps2 – usb port for the mainboard with extra detailed directions, I apply changing the ps2 port for the Asus P5KPL AM -SE mainboard, the opposite ports additionally do the identical, however on the mainboard this port is most frequently affected. As a result of the keys and mouse are eliminated loads, they’re unfastened.

The required instruments to interchange the ps2 port:

Welding torch, ought to use a 90w soldering iron, massive torch to get it rapidly. Or you should use a DC welder
Thermometer
There are numerous kinds of lead people who smoke which can be regular and good, priced from 70k – 300k. Use the common one.
Lead, solder paste and motherboard to get ps2 . gongs

+ How one can take away the ps2 port on the mainboard

First, you plug within the soldering iron to make it scorching, activate the torch and keep in mind to take away the torch head.
Put solder, lead on the again of the ps2 port and mix the soldering iron and torch to take away.
Go away the torch in place, and the soldering iron will transfer across the pins of the ps2 gong.
Simply do that and gently press down for the ps2 port to fall out, listen to not press too exhausting, or pull too exhausting to bend the board, break the circuit, it won’t get replaced.

+Put lead on the mainboard’s PS2 port

After taking out the ps2 port, the lead continues to be caught within the sockets, it’s important to suck the lead out to connect the ps2 port.
Use a lead sucker on the highest and a soldering iron on the underside.
Place the soldering iron proper on the base of the suction rod, await the thread to soften and press the button on the result in suck. See the image under, pull out all of the holes, put some solder grease in it to make it quicker.

+Connect the brand new PS2 port to the motherboard:

After eradicating all of the lead from the mainboard, you need to clear it.
Use a PS2 port taken from one other mainboard, keep in mind to take away all of the lead on the ps2 port that must be changed to insert it into the outlet.
Plug the PS2 port into the holes on the mainboard then put the lead and solder paste to solder.

Clear and plug within the ps2 port to test.

That is the best way to exchange the ps2 port for the mainboard, it seems to be easy but it surely’s additionally a bit troublesome, you simply must work exhausting a couple of instances to get used to it. The vital factor right here is an efficient soldering iron, mixed with a torch could be very quick, with no torch is ok, but it surely takes a short time, good luck!